MK1 Verminator trigger issue

FX's "TDR" or "Take Down Rifle". Biathlon style sidelever action in a small package.

MK1 Verminator trigger issue

Postby pad on Thu Dec 29, 2016 4:34 pm

Hi Guys!!
Fisrt post on here is with a problem sorry, but any help would be greatly appreciated.
I have a MK1 FX verminator (owned for around 8yrs) that had a main valve fault so I stripped the unit and replaced it (all good!) The issue I have is when the rifle is bare and not in the plastic ABS stock it will fire, however, when completely reassembled the rifle will cock and load but the trigger will not release, almost as if the safety is still on (it isn't.)
Just wandered if anyone had had a similar issue or what it could be as there doesn't appear to be anything restricting trigger pull but I am now at a dead end.
Thanks in advance
Posts: 1
Joined: Mon Apr 14, 2014 10:04 pm

Re: MK1 Verminator trigger issue

Postby Suffolk Rifle on Thu Dec 29, 2016 6:14 pm

You might find that the trigger/sear pins have moved (think that they're the same as the Cyclone) and if fired out of the stock, they can move side to side
.177 walnut stocked Cyclone Carbine
.177 mk1 Vermy
.177 walnut stocked L/W Typhoon
.177 synth stocked S/T Typhoon
User avatar
Suffolk Rifle
Posts: 266
Joined: Sat Oct 22, 2011 8:37 am

Return to FX Verminator

Who is online

Users browsing this forum: No registered users and 1 guest