I need help...

FX's "pistol grip action" rifle ( FX3100 / FX3100-22), and until the Royale (see below) comes out officially, FX's latest model.

I need help...

Postby woytan on Sun Jan 11, 2009 8:53 pm

I'm looking for diagram and parts list for the FX-Storm
I want to change to the biathlon handle such as the FX-Cutlas/Gladiator

someone help me?
User avatar
woytan
 
Posts: 46
Joined: Sun Jan 04, 2009 3:03 am
Location: Poland

Re: I need help...

Postby ian johnstone on Mon Jan 12, 2009 11:45 am

Should be fairly straightforward & it's something I had thought about too !
You'd probably only need the 'sidelever'. The hex bolt holding the Bolt to the top of the pistol grip could be removed (the hole might need opening-up a bit) then the rear of the bolt would be free to slide. The pistol grip could then be kept as the magazine locking device only, maybe?

Sorry for all the technical details :oops:
ian johnstone
 
Posts: 979
Joined: Sun Apr 06, 2008 5:34 pm
Location: Cotswolds. U K

Re: I need help...

Postby woytan on Mon Jan 12, 2009 3:17 pm

change seems to be simple to do
I saw in the diagram which parts are to exchange

how to get to spring hammer?
User avatar
woytan
 
Posts: 46
Joined: Sun Jan 04, 2009 3:03 am
Location: Poland

Re: I need help...

Postby ian johnstone on Mon Jan 12, 2009 7:17 pm

Should be almost exactly the same as the Cyclone (see PolarWolf's stuff on that).
ian johnstone
 
Posts: 979
Joined: Sun Apr 06, 2008 5:34 pm
Location: Cotswolds. U K

Re: I need help...

Postby woytan on Mon Jan 12, 2009 9:33 pm

P1010486.JPG
P1010486.JPG (76.74 KiB) Viewed 10797 times
User avatar
woytan
 
Posts: 46
Joined: Sun Jan 04, 2009 3:03 am
Location: Poland

Re: I need help...

Postby ian johnstone on Tue Jan 13, 2009 5:37 pm

Not sure at all! But do you need to?
That's essentially just the main axis or guide rod for the pistol grip, it doesn't do anything but keep everything aligned (does it?).

I had a look at mine earlier, & there's no obvious screw threads etc - maybe you'd see how its attached to the action when you dis-assemble the action block ?

It's a shame your photo has the Mag lock in the open position as it gives the impression that the 'silver' rod is clamped by the grip hex bolt (at top) whereas that is really gripping the larger 'brass' rod - The Bolt in fact. What your pics does show well is the Bolt lug within the action that the sidelever works upon (just sitting there waiting :) ).
ian johnstone
 
Posts: 979
Joined: Sun Apr 06, 2008 5:34 pm
Location: Cotswolds. U K

Re: I need help...

Postby woytan on Wed Jan 14, 2009 12:10 am

done !
tomorrow I will try to post photos of this operation
User avatar
woytan
 
Posts: 46
Joined: Sun Jan 04, 2009 3:03 am
Location: Poland

Re: I need help...

Postby ian johnstone on Wed Jan 14, 2009 11:15 am

tomorrow ???? :o that's not good enough :x

No, a description & some photos will be keenly awaited :D
ian johnstone
 
Posts: 979
Joined: Sun Apr 06, 2008 5:34 pm
Location: Cotswolds. U K

Re: I need help...

Postby woytan on Wed Jan 14, 2009 1:27 pm

You can start to see the following website:

http://talks.guns.ru/forum_light_message/30/305435.html

further actions on the following photo:

P1010507.jpg
P1010507.jpg (120.1 KiB) Viewed 10749 times


P1010502.jpg
P1010502.jpg (111.64 KiB) Viewed 10748 times


P1010501.jpg
P1010501.jpg (116.3 KiB) Viewed 10745 times
Last edited by woytan on Wed Jan 14, 2009 2:30 pm, edited 2 times in total.
User avatar
woytan
 
Posts: 46
Joined: Sun Jan 04, 2009 3:03 am
Location: Poland

Re: I need help...

Postby woytan on Wed Jan 14, 2009 1:28 pm

P1010498.jpg
P1010498.jpg (116.68 KiB) Viewed 10731 times


P1010497.jpg
P1010497.jpg (123.34 KiB) Viewed 10728 times


P1010496.jpg
P1010496.jpg (121.97 KiB) Viewed 10719 times
User avatar
woytan
 
Posts: 46
Joined: Sun Jan 04, 2009 3:03 am
Location: Poland

Next

Return to FX Storm

Who is online

Users browsing this forum: No registered users and 1 guest

cron