Typhoon magazine conversion.

The entry level PCP from FX with grown-up performance! Together with the 12 or 16 shot variant, the FX T-12 in all types (FX1000 / FX1000-22 / FX1002 / FX1002-22 / FX1012 / FX1012-22 / FX1212 / FX1212-22). Also known as Logun Solo. The Biathlon model is also based on this platform.

Typhoon magazine conversion.

Postby kenhawker on Mon Jun 13, 2016 6:27 pm

2mm thick x 20mm x 20mm aluminium angle 18mm wide
3mm x 18mm x 18mm flat bar
1 x 10mm od x 8mm id brass washer
10mm drill bit
super glue.

As the breech block is 18mm wide and the length of the breech inlet is 20mm its pretty easy to make.
The 18mm plate is simply glued to the angle then a 10mm hole drilled for the bolt probe.
The barrel is removed and the brass washer is carefully glued to the front making sure that no glue touches the breech seal. Then the barrel is fitted back into the breech.
Typhoon tray and magazine.jpg
Typhoon tray and magazine.jpg (37.55 KiB) Viewed 4449 times
13428483_10208677910937138_4545576156882743244_n.jpg (65.97 KiB) Viewed 4449 times
13423888_10208677910617130_8229664963023324797_n.jpg (61.86 KiB) Viewed 4449 times
13346943_10208677911257146_7570903642386262786_n.jpg (50.7 KiB) Viewed 4449 times
Typhoon magazine tray.png
Typhoon magazine tray.png (6.84 KiB) Viewed 4449 times
Posts: 3
Joined: Sun Nov 25, 2012 8:43 pm

Re: Typhoon magazine conversion.

Postby cyclone sniper on Tue Jun 14, 2016 11:39 pm

love it .. great mod... well done
FX cyclone .22 FAC,
cyclone sniper
Posts: 391
Joined: Sat Mar 05, 2011 12:10 pm
Location: co Offaly Ireland EIRE

Return to FX Typhoon/T-12/Biathlon

Who is online

Users browsing this forum: No registered users and 2 guests