Fx Whisper loose stock

The entry level PCP from FX with grown-up performance! Together with the 12 or 16 shot variant, the FX T-12 in all types (FX1000 / FX1000-22 / FX1002 / FX1002-22 / FX1012 / FX1012-22 / FX1212 / FX1212-22). Also known as Logun Solo. The Biathlon model is also based on this platform.

Fx Whisper loose stock

Postby bds on Wed Oct 29, 2014 10:58 pm

The action (and other parts) on my Fx Whisper seem very loose in the stock. I already tightened the one screw on the bottom of the stock that holds it. If I shake or move the gun around a bit, I can feel everything moving around in the stock. Is this normal?
bds
 
Posts: 7
Joined: Thu Jul 03, 2014 9:53 am

Re: Fx Whisper loose stock

Postby cyclone sniper on Wed Oct 29, 2014 11:55 pm

if its a jingle sound and only when un cocked its just the hammer spring , perfectly normal
FX cyclone .22 FAC,
cyclone sniper
 
Posts: 389
Joined: Sat Mar 05, 2011 12:10 pm
Location: co Offaly Ireland EIRE

Re: Fx Whisper loose stock

Postby bds on Thu Oct 30, 2014 8:14 am

No, it's more like the entire action, barrel and air tube can move quite a bit inside the stock. Other Whisper owners that can confirm this is normal?
bds
 
Posts: 7
Joined: Thu Jul 03, 2014 9:53 am

Re: Fx Whisper loose stock

Postby cyclone sniper on Thu Oct 30, 2014 10:19 pm

bds wrote:No, it's more like the entire action, barrel and air tube can move quite a bit inside the stock. Other Whisper owners that can confirm this is normal?

i dont own a whisper but i can tell you its not normal for any action to move in its stock
FX cyclone .22 FAC,
cyclone sniper
 
Posts: 389
Joined: Sat Mar 05, 2011 12:10 pm
Location: co Offaly Ireland EIRE

Re: Fx Whisper loose stock

Postby bds on Mon Nov 10, 2014 6:09 pm

Can someone with an Fx Whisper please post some photographs that show how exactly the action is connected to the stock?
Is there a difference between a synthetic and a wooden stock?

Mine just has one 30 mm long hex screw going through the stock and screwing into the part of the action where airtube connects. No washers or other parts in between. The screw is possibly a bit too long, or a previous owner left out one or more parts.
bds
 
Posts: 7
Joined: Thu Jul 03, 2014 9:53 am

Re: Fx Whisper loose stock

Postby cyclone sniper on Mon Nov 10, 2014 8:41 pm

kinda sounds like the action screw may have been over tightened at some stage and pulled through the stock , try a washer or 2 on the action screw !! and gently re tighten ....
FX cyclone .22 FAC,
cyclone sniper
 
Posts: 389
Joined: Sat Mar 05, 2011 12:10 pm
Location: co Offaly Ireland EIRE


Return to FX Typhoon/T-12/Biathlon

Who is online

Users browsing this forum: No registered users and 1 guest