is this accurate enough or am i to picky

The entry level PCP from FX with grown-up performance! Together with the 12 or 16 shot variant, the FX T-12 in all types (FX1000 / FX1000-22 / FX1002 / FX1002-22 / FX1012 / FX1012-22 / FX1212 / FX1212-22). Also known as Logun Solo. The Biathlon model is also based on this platform.

is this accurate enough or am i to picky

Postby wimbo on Mon Sep 27, 2010 4:54 pm

after some shooting with my wisper .22 these are the groups i was shooting. i shot in doors and used a mount to support my gun.
Still not each shot on the other like im use to have wenn shooting my .338 or my .308 but therefor i wanne know if this is normal group or it can become better by maybe other ammo.
I shot all 3 groups of 5 shots at 35 yard .
group nr 1 was around 2 cm.Image
group nr 2 was around 3,5 cm.Image
group nr 3 was around 4,5 cm.Image

i used a schmidt&bender scope 3-12 x50 with parallax adjustment.
so plz tell me if i can improve by anyway,couse with my fx 2000 .177 my groups are smaller.
wimbo
 
Posts: 10
Joined: Thu Sep 09, 2010 1:47 pm
Location: harderwijk, holland

Re: is this accurate enough or am i to picky

Postby PolarWolf on Mon Sep 27, 2010 5:11 pm

At 35 yards you should be able to print single hole groups.
Webley FX2000 .22
FX T400 .25
FX Monsoon .22 Walnut
FX Cyclone .177 Regulated
FX Biathlon .177 Regulated

I've had:
Pretty much every model FX made :)
User avatar
PolarWolf
Site Admin
 
Posts: 971
Joined: Fri Mar 21, 2008 12:55 pm
Location: Fryslan, Netherlands

Re: is this accurate enough or am i to picky

Postby wimbo on Mon Sep 27, 2010 9:00 pm

so polar,

any surgestions?? other pellets maybe?
i lowered the tention of my hammer spring ..that helped quiet a bid. but this is what i can produce now..much worse as my fx 2000 .
wimbo
 
Posts: 10
Joined: Thu Sep 09, 2010 1:47 pm
Location: harderwijk, holland

Re: is this accurate enough or am i to picky

Postby PolarWolf on Mon Sep 27, 2010 9:58 pm

I recall you mentioning accuracy issues earlier, it seems those haven't resolved. You've also modified the shroud as I recall, did you check alignment as was advised in the other topic about this? It's the most likely cause of the problem: clipping.
Webley FX2000 .22
FX T400 .25
FX Monsoon .22 Walnut
FX Cyclone .177 Regulated
FX Biathlon .177 Regulated

I've had:
Pretty much every model FX made :)
User avatar
PolarWolf
Site Admin
 
Posts: 971
Joined: Fri Mar 21, 2008 12:55 pm
Location: Fryslan, Netherlands

Re: is this accurate enough or am i to picky

Postby wimbo on Tue Sep 28, 2010 6:40 am

i shot without the shourd on it also the sillencer thingy's inside were out wenn i did the testing.
Shot with and without the brass barrel centre ring,also no differance to the shot groups.
so clipping although the shourd cap had some marks of pellets hitting it cant be the problem.
damn... im a bid desperate..ahh well my wife tell's me the wood always is still nice...damn women.
wimbo
 
Posts: 10
Joined: Thu Sep 09, 2010 1:47 pm
Location: harderwijk, holland


Return to FX Typhoon/T-12/Biathlon

Who is online

Users browsing this forum: No registered users and 1 guest

cron