Fx Cyclone regulator O rings measures

The fast action, biathlon style sidelever shooter from FX (FX5100 / FX5100-22 / FX5102 / FX5102-22 / FX5103/ FX5103-22). Also known as BTAS (Ben Taylor And Son) Cyclone and Webley Spectre.

Fx Cyclone regulator O rings measures

Postby pigmalion on Fri Sep 14, 2018 5:47 pm

Hello! does anybody knows this measures?, I have now three regulators and all leaks, I am trying to change at least the two outer orings and the first inner one (it can be seen in the image), just to see if can solve the problem, because now I have my two Cyclones inoperative, but firstly I need to Know the exact measures
I have too a Royale 400.22 regulator with the same problem but in this case I know the measures.
Thank you. Regards
Attachments
20180914_170352-min.jpg
20180914_170352-min.jpg (657.33 KiB) Viewed 159 times
pigmalion
 
Posts: 17
Joined: Sat Apr 10, 2010 11:34 am

Re: Fx Cyclone regulator O rings measures

Postby cyclone sniper on Tue Sep 18, 2018 8:14 pm

who made the reg ? ben taylor ?
FX cyclone .22 FAC,
cyclone sniper
 
Posts: 389
Joined: Sat Mar 05, 2011 12:10 pm
Location: co Offaly Ireland EIRE

Re: Fx Cyclone regulator O rings measures

Postby Solo1 on Tue Sep 18, 2018 10:48 pm

It is a Ben Taylor regulator and it looks to be identical to the one from my Logun Solo/FX Typhoon. The sizes of the O rings I use are as follows:

The 2 larger O rings measure :
Outside diameter 25mm
Inside diameter 20mm
O ring thickness 2.5mm

The small O ring measures:
Outside diameter 11.21mm
Inside diameter 7.65mm
O ring thickness 1,78mm

I usually buy my O rings from
https://www.ebay.co.uk/str/sealforceori ... lsolutions

I find them very reasonably priced for high-quality Viton O rings

Hope this helps
User avatar
Solo1
 
Posts: 98
Joined: Mon Sep 07, 2009 5:19 pm
Location: East Anglia, UK

Re: Fx Cyclone regulator O rings measures

Postby pigmalion on Wed Sep 19, 2018 5:56 pm

Cyclone sniper: I think they are Ben Taylor´s type regulators, they are about the same time but sent from FX. Are installed inside the bottle, rear part.
Solo1: Thank you very much for the input I will try to get them.
Thanks guys!!!.
pigmalion
 
Posts: 17
Joined: Sat Apr 10, 2010 11:34 am


Return to FX Cyclone

Who is online

Users browsing this forum: No registered users and 7 guests

cron